CITA EV @ EVIS EVENT | 20-22 MAY 2024 | ADNEC Centre, Abu Dhabi
Access with Mobile App
via WiFi/4G/Ethernet
Solar PV charging
with RS485 Intergration
Compatible with all
Type 2 Charging Cables
Power Range
Upto to 7.4kW
Warranty
3 Years
PME Fault
Deduction
RCD DC Leak
Protection
MID Certified
Energy Meter
Active & Dynamic
Load Balancing
OCPP 1.6
JSON Integration
IEC 62196 Type 2, IP54, Locking
Mode 3 (IEC 61851-1 / SAE J1772 compliant communication protocol)
Integrated
IP65, IK10
-30°C ~ +55°C
300mm x 300mm x 130mm
AC Nominal Output
1 phase + netural+ PE
230VAC +/-10%
50/60Hz
1 phase + netural+ PE
230VAC +/-10%
1.4kW – 7.4kW programmable
6 – 32A programmable
Yes, with an external CT clamp (100A max)
Yes, via cloud software
3-years
Wi-Fi, Optional: 4G/Ethernet
Yes, Android and iOS App
OCPP 1.6 – JSON
CES 2021 Innovation Award Honoree
OZEV approved for Domestic and Commercial Grants in the UK
OCCP 1.6 Json Integration
CES 2021 Innovation Award Honoree
OZEV approved for Domestic and Commercial Grants in the UK
OCCP 1.6 Json Integration
Certified by Dubai Water and Electricity Authority in UAE
Certified by Abu Dhabi Quality & Conformity Council in UAE
Certified by Dubai Water and Electricity Authority in UAE
Electric Vehicle chargers should be installed by a suitably qualified and competent person, taking into consideration all local electrical safety and wiring regulations in your installation country. CITA recommend the installation is by our fully trained and vetted CITA Installation Partners. Full details of these partners can be found on our website.
The installation will vary depending on your electrical infrastructure. However, the basis of installation would be, a new circuit from your electrical board to the electric vehicle charger, with suitable circuit breaker, as deemed by local electrical wiring regulations.
Charging can be started and stopped, by means of a secure RFID card, or through your mobile application, meaning the start and stop procedures are both simple and secure.
Yes, you can create additional app users, whom you will give permissions to use the charger as a separate account user. This allows reporting on energy for all individual users.
Our Development team use charging data for diagnostic purposes.
Our Support Team may access your data in the event of a fault.